Chargers - adaptors - batteries. Colors – navy blue
Different connections and different cables are no longer a worry with REEVES-myConvertics. REEVES-myConvertics includes a USB-C to USB-C charging cable with a length of 48 cm, along with adapters for Micro-USB, 8 Pin for Apple® and USB-A. Depending on the end device and adapter, the USB-C cable is suitable for up to 60 watts Fast Charge. In addition, the cable not only supplies the device to be recharged, but can also be used to transfer data. The cable and all the adapters are made of recycled TPE plastic. 6-in-1 Function: - USB-C to USB-C - Micro-USB to USB-C - 8 Pin for Apple® to USB-C - USB-C to USB-A - Micro-USB to USB-A - 8 Pin for Apple® to USB-A All components are stored in a handy housing made of ABS plastic, which is opened by a rotatable closure and remains firmly closed by a magnetic closure even when shaken. A sturdy carabiner makes it easy to attach to a backpack or similar. myConvertics is conveniently flat and offers a particularly large and present printing area. The advertising can be applied with a large-area UV print or a pad print. Note: The logo remains visible even when the case is opened.
Different connections and different cables are no longer a worry with REEVES-myConvertics. REEVES-myConvertics includes a USB-C to USB-C charging cable with a length of 48 cm, along with adapters for Micro-USB, 8 Pin for Apple® and USB-A. Depending on the end device and adapter, the USB-C cable is suitable for up to 60 watts Fast Charge. In addition, the cable not only supplies the device to be recharged, but can also be used to transfer data. The cable and all the adapters are made of recycled TPE plastic. 6-in-1 Function: - USB-C to USB-C - Micro-USB to USB-C - 8 Pin for Apple® to USB-C - USB-C to USB-A - Micro-USB to USB-A - 8 Pin for Apple® to USB-A All components are stored in a handy housing made of ABS plastic, which is opened by a rotatable closure and remains firmly closed by a magnetic closure even when shaken. A sturdy carabiner makes it easy to attach to a backpack or similar. myConvertics is conveniently flat and offers a particularly large and present printing area. The advertising can be applied with a large-area UV print or a pad print. Note: The logo remains visible even when the case is opened.
Wireless charger 15W in round design. Made of recycled aluminium, a material with almost infinite recycling possibilities, keeping its original properties and consuming less energy in this process. Compatible with devices equipped with Qi wireless charging technology. Non-slip base, with Type-C charger cable included, and available in a wide range of colours. Presented in an individual kraft design box, with instruction manual in English and Spanish. Manufactured according to RoHS standards and in compliance with the following safety requirements: Overheating protection system. Over-charge protection system. Blocking system to prevent short circuits.
Elegant and handy organizer charger in PU leather. Wireless charger integrated, with charging status light and adjustable to any notepad size. Including ball pen holder and a variety of pockets and holders for cards and other accessories. Available in a wide range of colors, with button closure and elastic bands. Micro USB cable included.
15W magnetic wireless charger, made from PU. Includes a foldable stand, with the possibility of several smartphone positions, and a charging status indicator. Compatible with devices equipped with wireless charging technology. Includes 1m USB charging cable, with Type C input connector, and a metallic ring with adhesive. User manual available in Spanish and English.
Charging cable with 4 connectors: USB, micro USB, USB-C and compatible with iOS devices, which enables charging multiple devices with different connectors at the same time, USB-C tip with data synchronisation function, 28 cm length, casing features large area for personalization, product made of metal and ABS
Charging and data synchronisation cable with special space for personalisation and 4 plugs: 2x USB-C, USB and micro USB, which enables charging devices with different connectors using one cable, USB-C to USB-C connectors enable fast charging, 100 cm cable length, product made from ABS and nylon
Extendable charger and synchroniser cable, suitable for data transfer and made of recycled aluminium with metallic finish. Central housing with large branding surface, specially designed for laser engraving. Available in a wide range of colours, with matching cables. Type C and USB input connections, with Lightning, Micro USB and Type C outputs. 5V DC 2.4A. Packed in an individual kraft design bag.Recycled Aluminium is a material with almost infinite recycling possibilities, keeping its original properties and consuming less energy during this process.GRS Certification (Global Recycled Standard), which guarantees the recycled origin of the material used to manufacture the product.
Keyring, charging cable set with 3 plugs: USB, USB type C and micro USB
Bracelet with stand function and charging cable, made of a combination of RPET polyester. Designed to be easily placed between the case and the smartphone thanks to its carrying accessory. Includes matching strap, black metal swivel carabiner and wrist adjustment accessory. It offers charging and data transfer functionality, with 60W Type-C input, and Type-C outputs.
The ENERGO Inductive Charging Pad is an elegant combination of style and functionality. Made of leather-like material (PU), it allows you to wirelessly charge your smartphones and other Qi-compatible devices, blending perfectly with any desk or table. Enjoy a convenient and elegant charging solution without wires with ENERGO!
Power bank 10000 mAh, fast charging function, USB-C input 5-12V/1.5-3A (18W), USB 5-12V/1.5-3A (18W) output, USB-C 5-12V/1.67-3A (20W) output, can charge two devices simultaneously, digital display of power level, USB-C cable included
External auxiliary battery of 4,000 mAh made of recycled aluminum. With USB output and USB Type C input/output. LED indicators of charging status and included Type C charging cable. Includes recycled aluminum label. Recycled aluminum is a material with almost infinite recycling possibilities, retaining its original properties while consuming less energy in the process. GRS certification (Global Recycled Standard), which guarantees the recycled origin of the material used to manufacture the product. USB Type C input/output: 5V DC 2.4A USB output: 5V DC 1A The capacities shown in all our external auxiliary batteries are real, incorporating all Grade A and non-recycled batteries, with a lifespan of at least 500 charge cycles and in accordance with CE regulations. Additionally, they are manufactured according to RoHS standards and in compliance with the following safety requirements: Overcharge protection system for the power bank. Complete discharge protection system that provides greater durability for the power bank. Locking system to prevent short circuits. Constant load transfer system, according to the capacity of the destination device.
External auxiliary battery in recycled ABS with rubbery finish and 10,000 mAh charging capacity. With a charging indicator screen and ON/OFF button on the side. Includes Type C and dual Lightning output for simultaneous charging of 2 devices and Type C and USB output connection. With distinctive RABS logo on the trans part.
External auxiliary battery made of recycled aluminium, with a charging capacity of 2600 mAh. Easy to carry thanks to its small size, with ON/OFF button for charging control and Type C input/output connectors + USB output. Including LED charging light and Type-C cable. Available in a wide range of colours.The capacities shown in all our external auxiliary batteries are real, all of them incorporating non-recycled, grade A batteries, with a service life of at least 500 charging cycles, and complying with CE regulations. They are manufactured according RoHS standards, and in compliance with the following safety requirements: Power bank overcharge protection system. Complete discharge protection system, which increases the durability of the power bank. Blocking system to prevent short circuits. Constant charging transfer system, in accordance with the capacity of the target device.
External auxiliary battery made from recycled ABS (RABS) with a capacity of 5,000 mAh. Includes dual USB output for simultaneous charging of 2 devices, Micro USB input, and Type C input/output connection. With charge status indicator. Includes RABS label.RABS is a highly recyclable plastic with great strength and a multitude of applications that make it an eco-friendly solution.The capacities shown in all our external auxiliary batteries are real, incorporating all grade A and not recycled batteries, with a lifespan of at least 500 charge cycles and according to CE regulations.Additionally, they are manufactured in accordance with RoHS standards and meet the following safety requirements:Power bank overload protection system.Complete discharge protection system that provides greater durability for the power bank.Locking system to prevent short circuits.Constant charge transfer system, according to the capacity of the destination device.5000 mAh. 2 USB Outputs. Micro USB Input. Type C Output and Input.
Baltimore Wireless 2-in-1 Travel Charger is designed to deliver fast, effortless power for your everyday essentials. Lightweight and functional, it eliminates cable clutter and replaces multiple chargers with one elegant solution. Crafted from RCS-certified recycled ABS with the classic Baltimore matte PU coating, it offers a sleek, minimalistic look. Compact and travel-ready, it wirelessly charges both your phone and your watch at the same time, making it the perfect companion for life on the move. With Qi compatibility, precise magnetic alignment and fast wireless charging, your devices stay perfectly positioned and power up quickly. Simply connect it to a USB-C power source for a seamless, organised charging setup. Compatible with Qi-enabled devices, including phones and Apple and Samsung watches. Type-C input: 5V/3A, 9V/2A. Wireless output: Phone 5W/7.5W/10W/15W (MAX), Watch 2.5W (MAX). Total recycled content: 36% based on total item weight. Certified by Control Union, CU1162221.
The Baltimore RCS Phone cord is a smart, hands-free essential designed for anyone who wants to stay connected on the move. Crafted from RCS certified recycled TPE with a matte PU coating making it visually appealing. Created for life on the go, it rests comfortably around the neck like a lanyard keeping your phone secure and easily accessible. Ready for fast charging or data transfer whenever you need it, ensuring a seamless on-the-go connection. The reinforced clip and ring are engineered to be firm and sturdy making it strong enough to hold even heavier smartphones securely while worn. The adjustable 160 cm spiral cord offers flexible reach without tangling, ensuring a comfortable lanyard experience. Charging output: PD 60W (20V/3A). Connection: USB-C to USB-C. Supports superfast charging, data sync, CarPlay & Android Auto. Total recycled content: 49% based on total item weight. Certified by Control Union, CU1162221.
Adjust the look of your myMatola Wireless Charger according to your design needs. The charger with a slightly frosted plastic surface is available in both black and white. The accompanying soft silicone ring can be selected from 17 different colors. Fast charging is possible up to 15 watts of output power (depending on the compatibility of the end device). The charger can be fully imprinted with UV- or up to 4c-pad printing. The maximum print area amounts to 70 mm in diameter. The top of the silicone ring is slightly raised, protecting the print and the end device from wear and scratches. The bottom of the ring is ribbed and provides slip protection even on smooth surfaces. A 1-meter USB-A to USB-C charging cable is included, as is a high-class gift box in the shape of a slipcase. The status of the device can be visually checked via a function LED.
Adjust the look of your myMatola Wireless Charger according to your design needs. The charger with a slightly frosted plastic surface is available in both black and white. The accompanying soft silicone ring can be selected from 17 different colors. Fast charging is possible up to 15 watts of output power (depending on the compatibility of the end device). The charger can be fully imprinted with UV- or up to 4c-pad printing. The maximum print area amounts to 70 mm in diameter. The top of the silicone ring is slightly raised, protecting the print and the end device from wear and scratches. The bottom of the ring is ribbed and provides slip protection even on smooth surfaces. A 1-meter USB-A to USB-C charging cable is included, as is a high-class gift box in the shape of a slipcase. The status of the device can be visually checked via a function LED.
